For years, researchers believed that the smaller the domain size in a ferroelectric crystal, the greater the piezoelectric properties of the material. However, recent findings by Penn State researchers have raised questions about this standard rule.
Ferroelectric materials possess spontaneous electric dipole moments that can be reversibly flipped by applying an electric field. Domains are areas in the ferroelectric crystal that have the dipole moments aligned in the same direction. Piezoelectricity is a material property where the crystal generates electrical charge under an applied mechanical force. This capability enables piezoelectrics to be used in electronics, sensors and actuators.
“So many devices in our daily life utilize the ability of a material to convert electrical signals to mechanical signals and vice versa,” said Bo Wang, postdoctoral scholar in materials science and engineering. “In most of these applications, the piezoelectric material plays a key role. And the most advanced piezoelectric materials are the ferroelectric materials.”
At a microscopic scale, ferroelectric materials consist of many domains, and these domains range in size from a few nanometers to as much as millimeters. Each domain consists of uniform or nearly uniform distribution of dipole moments, which occur when there is a separation of charge. The regions between adjacent domains are known as domain walls.
“The domain walls in ferroelectric crystals are interfaces with a very small thickness over which the dipole moments change their directions. It’s well known in the research community of ferroelectric materials that these domain walls have a strong influence on piezoelectricity,” Wang said. “There is a general belief in the community that the smaller the domain size or higher the domain wall density, the larger the piezoelectric coefficient.”
However, the recent work by Wang and his co-workers, published in Advanced Materials, challenges this conventional wisdom.
“Our theory and computation demonstrated that such a conventional view is actually not often correct,” Wang said.
The researchers found that the idea that smaller domains lead to higher piezoelectricity is based on very limited existing data without a solid theoretical foundation.
“Based on this conventional wisdom, many in the research community have tried to find ways to make all these domains smaller to enhance the piezoelectricity, and often when they see some improvement in the piezoelectric performance, one of the first things that comes to mind is maybe due to the smaller domains,” said Long-Qing Chen, Hamer Professor of Materials Science and Engineering, professor of engineering science and mechanics, and professor of mathematics at Penn State. “Our work provides a theoretical foundation for correlating the piezoelectricity to crystal symmetry, crystal orientation, and domain configuration.”
In that paper, they referred to findings by other researchers that an AC electric field can improve the piezoelectric response of the crystal by 20% to 40% compared with the crystal treated by a DC electric field. But the team discovered that inside the crystal during AC switching cycles, the domain sizes actually got bigger, not smaller as would be expected.
“We proposed a theoretical model of domain change under electric fields, we use computation to confirm it, and because of our simulation, we have shown that researchers in the future will have to look inside the crystal,” Chen said. “The previous researchers showed that higher piezoelectric response is due to smaller domains, but they only looked at the surface. We showed computationally that actually, the domains became bigger with higher piezoelectricity, and that was found by examining under the crystal’s surface.”
According to Wang, this new understanding of the relationship between ferroelectric crystal domain size and piezoelectricity can provide guidance to improve piezoelectric performance of materials.
“We hope that this study allows people to rethink the design principles for piezoelectric materials, perhaps creating better piezoelectric materials in ways that were not thought possible before,” Wang said. “This may enable better piezoelectrics made from lower-cost materials, or from materials that are more environmentally friendly.”
Along with Wang and Chen, the other author on the study was Fei Li, a previous postdoctoral researcher in materials science and engineering at Penn State and now a full professor at Xi’an Jiaotong University in China.
The National Science Foundation supported this research.
Materials provided by Penn State. Original written by Jamie C. Oberdick. Note: Content may be edited for style and length.